CalderaSpas Moorea Manual do Proprietário descarregar pdf (Página 22)

LOCKING FEATURES

The locking features, TEMPERATURE LOCK and SPA LOCK, are enabled from the control panel by a specific combination of buttons. Once enabled, a lock will remain

active until the specific button combination is applied to disable the lock. Even if power is disconnected from the spa and soon thereafter reapplied (such as a power

outage), the lock will remain in place.

The “SET” button is used to initiate advance panel features such as the spa panel lock, temperature lock, and optional color wheel mode.

SPA LOCK

The Spa Lock feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted use of the spa.

ToactivatetheSpaLock,press“SET”button+“TEMP▼”buttonandholdforthreesecondsuntiltheSPAandlocksymbolareilluminated.

TodeactivatetheSpaLock,press“SET”button+“TEMP▼”buttonandholdforthreesecondsuntiltheSPAandlocksymbolarenolonger

illuminated.

TEMPERATURE LOCK

The Temperature Lock feature deactivates the temperature control function from the control panel. All other functions on the control panel will operate

normally. Temperature Lock is most often used by those who do not want others to change the set temperature of the spa water.

ToactivatetheTemperatureLock,press“SET”button+“TEMP▲”buttonandholdforthreesecondsuntillocksymbolisilluminated.

To deactivate the Temperature Lock, press “SET” button + “TEMP

▲”

button and hold for three seconds until the lock symbol is no longer illuminated.

MAIN CONTROL PANEL BUTTONS AND DISPLAY

Your spa control panel is illuminated with a Light Emitting Diode (LED) and uses convenient push buttons that allow you to set the water temperature as well as the

hydrotherapy jets and mood lighting.

DISPLAY INVERSION

You may invert the main, four-digit display for easier viewing from inside the spa. Press and hold the “SET” button for three seconds until the display is inverted. Press

and hold the “SET” button for three seconds a second time to invert the four-digit display back to its original position.

TEMPERATURE CONTROL

The set temperature range is from 80°F (27°C) to 104°F (40°C). The set temperature of the spa water will automatically be 102°F (39°C) the first

time power is applied. This is the setting programmed at the factory. After the spa has been set up and used, the last temperature value set by the

user will be stored in memory. If power is disconnected from the spa, it will automatically revert to the last set temperature when power is reapplied.

(Temperatures of any setting may rise slightly depending on the current use and condition of your spa, and on outside temperature.)

Todisplaythesettemperatureofthespa,pressthe“TEMP▲“or“TEMP▼“button.Thesettemperaturewillbedisplayed,unlessthespaislocked

(in which case the word SPA is displayed with the lock symbol). The set temperature display will automatically return to actual temperature after five seconds.To increase

thesettemperatureofthespawater,pressthe“TEMP▲“button.Eachtimethebuttonispressed,thesettemperaturedisplaywillincreasebyonedegree.Ifthebutton

is held down, the set temperature display will increase by one degree every half-second.

Todecreasethesettemperatureofthespawater,pressthe“TEMP▼“Eachtimethebuttonispressed,thesettemperaturedisplaywilldecreasebyonedegree.Ifthe

button is held down, the set temperature display will decrease by one degree every half-second.

If the set temperature value will not change, check the TEMP LOCK and SPA LOCK features. When either of these features are applied, the temperature control is disabled.

JETS BUTTON

Your spa model uses one, or two buttons which affect the jet pump(s):

The “JETS 1” (“JETS” for Kauai

) button activates jet pump 1. When the “JETS 1” button is pressed, the jets symbol will illuminate on the control

panel display. The symbol will remain lit until the button is pressed to turn off jet pump 1, or after one hour of continuous operation when the pump

automatically shuts off.

The “JETS 2” button (used on Moorea

™

, Hawaiian

and Martinique

) activates jet pump 2. On the Moorea, “JETS 2” also activates the cascading waterfall feature. When

the “JETS 2” button is pressed, the jets symbol will illuminate on the control panel display. The symbol will remain lit until the button is pressed to turn off jet pump 2, or

after one hour of continuous operation when the pump automatically shuts off.

MANUAL CLEAN CYCLE

The “CLEAN” button has been provided as a convenient timer for water maintenance. When the “CLEAN” button is pressed, jet pump 1 will activate. The jet pump

symbol will flash on and off until the cleaning cycle is complete. The total cleaning cycle time is ten minutes. If the clean cycle does not engage, make sure the SPA

LOCK is deactivated. SPA LOCK disables the controls on the control panel.

AIR JETS BUTTON

The “AIR” button activates the air blower (not available on the Martinique and Kauai

). When the “AIR” button is pressed, the air symbol will

illuminate on the control panel display. The symbol will remain lit until the button is pressed to turn off the air blower, or after 15 minutes when the

blower automatically shuts off. While the air blower is on, air only jets are operating throughout the spa. To stop the air blower when active, simply

press the “AIR” button.

OPERATING INSTRUCTIONS

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Comentários a estes Manuais

Sem comentários

CalderaSpas Moorea Manual do Proprietário Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Piscinas acima do solo CalderaSpas Moorea